DIG. HEIGHT GAUGE 600MM 0.05MM ACC. DRIVING WHEEL 0.01MM GRAD. S/STEEL
Click Image for Gallery
Two-column Dial Height Gauge 600 mm
SERIES 185-11
SERIES 185-11
Manufacturer Cat No: 185-024-11
Two-column Analogue Height Gauge
Two-column sensor height gauge with a dial gauge, measuring range 0-600 mm and graduation 0.01 mm, equipped with
a tracer tip and a guide with a knob to facilitate adjustment.
The readout from both the sensor and the meter attached next to it is easy and error-free. The columns are made of stainless steel. Measuring tip - made of sintered carbide.
Adjustment is made by turning a guide knob on the back of the unit which also acts as the fine adjuster.
Made of stainless steel (except the base). Measuring tip - made of sintered carbide.
Made of stainless steel.
Features at a glance
Technical parameters:
Description | Spec |
Measurement range: |
0-600 mm |
Scale: | 0.01 mm |
Counter: | one counter to measure on + and one to measure on - |
Accuracy: | ± 0.05 mm |
Dimension b1: | 180 mm |
Dimension b2: | 54 mm |
Dimension c: | 38 mm |
Dimension d: | Ø 20 mm |
Dimension h: | 88 mm |
Dimension L: | 810 mm |
Tracing tip: | YES |